LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Automatic Transmission Servicing) >> Removal & Installation >> Oil Cooler Pipes & Seals >> Installation

Oil Cooler Pipes & Seals: Installation

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The correct thread engagement is critical. Cross-threaded fittings can achieve proper tightness value and still leak.
  1. Install the transaxle oil cooler pipes.
  2. Install the transaxle oil cooler pipe clip bolt. Tighten the transaxle oil cooler pipe clip bolt to specification. See TORQUE SPECIFICATIONS .
  3. Install the transaxle oil cooler pipe fittings at the radiator. Tighten the transaxle oil cooler pipe fittings to specification. See TORQUE SPECIFICATIONS .
  4. Install the transaxle oil cooler hoses to the pipes.
  5. Lower the vehicle.
    CAUTION: Do not overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to the transaxle.
  6. Fill transaxle with appropriate fluid to proper level. See LUBRICATION .
  7. Inspect for proper completion of the repairs.
  8. Inspect for fluid leaks.
scientia non olet · About LEMON Manuals