Activating System
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition is off and key is removed. Connect passenger-side air bag module connector and install Connector Position Assurance (CPA) clip. See Figure. Install instrument panel trim pad. See INSTRUMENT PANEL TRIM PAD .
- Connect driver-side air bag module connector. See Figure. Install CPA clip. Install AIR BAG fuse in instrument panel fuse block. Install access panel on end of driver-side instrument panel. Check air bag system for proper operation. See SYSTEM OPERATION CHECK .