LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 357 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Right Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat belt buckle to the floor pan tunnel
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the seat belt buckle bolt (3).

    Tighten 

    Tighten the bolt to 48 N.m (35 lb ft).

  3. Install the seat belt buckle bolt plug.
  4. Reposition the right front seat to the original position.
    Fig 1: Installing Seat Belt Buckle, Bolt & Plug Into Floor Pan Tunnel (Right Front)
    G01560181Courtesy of GENERAL MOTORS CORP.