LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 354 (Seat System) >> Repair Instructions >> Lumbar Actuator Replacement - Manual >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. With a flat-bladed tool remove the lumbar actuator knob.
  2. Through the opening in the seat cushion cover, remove the lumbar actuator screws.
  3. Remove the actuator (1) from the seat cushion frame.
  4. Disengage the cable conduit (3) from the retainer on the actuator (1). Remove the cable conduit (3) from the retainer on the actuator (1).
  5. Rotate the cable end (2) 90 degrees upward. Remove the cable end (2) from the actuator (1).
    Fig 1: Removing Actuator From Seat Cushion Frame
    G01559897Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals