Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Align the tabs for the I/P trim plate (3) to the I/P carrier (1).
- Push the I/P trim plate (3) into the I/P carrier (1) to engage the retainers.NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the I/P accessory trim plate screws (2).
Tighten
Tighten the screws to 2 N.m (18 lb in).
- Close the I/P compartment door.