LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 345 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Latch Replacement - Instrument Panel (I/P) Compartment >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the door latch handle to the I/P compartment door.
    Fig 1: Installing Door Latch Handle To I/P Compartment Door
    G01559246Courtesy of GENERAL MOTORS CORP.
  2. Install the anti-rattle device to the door latch (2), if equipped.
  3. Install the door latch (2) to the I/P compartment door (3).
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Install the I/P compartment door latch screws (1).

    Tighten 

    Tighten the screws to 2.3 N.m (20 lb in).

    Fig 2: Installing Door Latch To I/P Compartment Door
    G01559247Courtesy of GENERAL MOTORS CORP.
  5. Connect the anti-rattle device to the door latch mounting point, if equipped.
  6. Install the inner I/P reinforcement cover to the I/P compartment door. Refer to DOOR REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT  .
  7. Inspect the I/P compartment door for proper operation.
  8. Close the I/P compartment door.
    Fig 3: Connecting Anti-Rattle Device To Door Latch Mounting Point
    G01559248Courtesy of GENERAL MOTORS CORP.