Removal Procedure
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument panel (IP) accessory trim plate. Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY (CHEVROLET) or TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY (PONTIAC) .
- Remove the screws (6) from the top of the IP cluster (5).
- Remove the IP cluster (5) pulling rearward.
- Disconnect the electrical connector (1) from the IP cluster (5).
- Remove the IP cluster (5) from IP (3).