Digital Radio Receiver Setup
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The Digital Radio Receiver Setup option does not contain a submenu. Digital Radio Receiver Setup will configure the following systems:
- DTCs
- Class 2 radio messages
For the Digital Radio Receiver, complete the following procedure, with the key in the ON position use a scan tool, in order to properly set up communication:
- At the Main Menu screen, select Diagnostics.
- At the Vehicle Identification screen, select the following options:
- Model Year
- Vehicle Line
- At the System Selection Menu screen, select Body.
- At the Vehicle Identification screen select the following:
- Platform Type
- Body Type
- At the Body screen, select Digital Radio Receiver.
- Select Special Functions.
- At the Special Functions screen, select DRR Setup.