Removal Procedure
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the washer solvent from the washer solvent container.
- Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
- Disconnect the washer pump electrical connector.
- Disconnect the washer pump hose.
- Using a small flat-bladed tool, remove the washer pump from the washer solvent container.
- Using a small flat-bladed tool, remove the washer pump seal from the washer solvent container.