LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 335 (Antilock Brake System) >> Repair Instructions >> ABS Automated Bleed Procedure >> Preliminary Setup

Preliminary Setup

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Turn the ignition switch to the OFF position.
  3. Connect the J 29532  according to the manufacturer's instructions.
  4. Turn the ignition switch to the ON position, engine OFF.
  5. Connect a scan tool and establish communication with the ABS system.
  6. Pressurize the bleeding tool to 35 psi.
scientia non olet · About LEMON Manuals