LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 332 (Steering Wheel & Steering Column) >> Repair Instructions >> Seal Replacement - Intermediate Steering Shaft >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Intermediate Steering Shaft Seal
G01579943Courtesy of GENERAL MOTORS CORP.
CAUTION: If steering column to cowl panel seal is torn or otherwise damaged, it must be replaced. Confirm that the seal and inner race are properly located. Failure to do so may allow carbon monoxide into the vehicle, which may result in serious personal injury or death.
  1. Install the intermediate steering shaft seal to the vehicle.
  2. Position the intermediate steering shaft seal on the front of dash panel.
  3. Install the intermediate steering shaft. Refer to INTERMEDIATE STEERING SHAFT REPLACEMENT  .