Installation (2.2L - L61 - Aluminum Engine)
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the starter. See Figure .
- Install the starter bolts. Tighten the starter bolts to 30 Ft. Lbs. (40 N.m).
- Connect the electrical connectors to the starter. See Figure . Tighten the battery terminal nut to 13 Ft. Lbs. (17 N.m).
- Connect the S terminal connector to the starter. Tighten the battery terminal nut to 27 INCH Lbs. (3 N.m).
- Lower the vehicle.
- Connect the negative battery cable.