Oil Cooler Pipes & Seals: Removal
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Allow sufficient clearance around the transaxle oil cooler pipes and around the hoses to prevent damage or wear which may cause fluid loss.
- Raise and support the vehicle. Position the drain pan. Remove the transaxle oil cooler pipe at the transaxle. See Figure . Remove the cooler pipe bracket stud. See Figure . Using seal remover, remove the oil cooler pipe seals. See Figure .
- Remove the transaxle oil cooler pipe fittings at the radiator. See Figure . Remove the transaxle oil cooler pipe clip bolt. Remove the transaxle oil cooler pipes.