LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Wheel Cylinder >> Removal

Wheel Cylinder: Removal

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Remove the tire and wheel assembly. Clean any dirt or foreign material around the wheel cylinder assembly inlet and pilot.
  2. Remove the brake pipe from the wheel cylinder. Install a rubber cap or plug to the exposed brake pipe fitting end in order to prevent brake fluid loss and contamination. Plug the open brake pipe end.
  3. Remove the brake drum. Remove the brake shoes. See BRAKE SHOES . Remove the wheel cylinder bolts. Remove the wheel cylinder.
scientia non olet · About LEMON Manuals