Park Brake Warning Lamp: Installation
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
Install the park brake warning lamp switch. Connect the park brake warning lamp switch electrical connector to the park brake warning lamp switch. Install the console. Install the front floor console by guiding the shift boot over the optional shift knob and over the emergency brake handle. Install the bolts to the front floor console. Lower the armrest. Install the optional center storage pocket. Press into place until fully seated. Install the optional power window switch plate. Install the front screw cover. Press into place until fully seated. On vehicles with manual transmission, attach the snaps on the shift boot. Install the shift boot, if removed.