Park Brake Cable (Left Rear): Removal
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Remove the cable from the equalizer. See Figure. Remove the cable from the axle bracket.
- Remove the tire and wheel assembly. Remove the brake drum. Insert a screwdriver between the brake shoe and the lower part of the rear park brake lever.
- Remove the cable eyelet fitting from the rear park brake lever. Remove the conduit fitting from the backing plate while depressing the retaining tabs.