Master Cylinder Reservoir: Removal
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the master cylinder. See MASTER CYLINDER . Remove the brake fluid level sensor from the reservoir. Secure the master cylinder in a vise. Do not clamp the master cylinder body, secure only at the flange. Carefully tap out the reservoir retaining pins.
- Remove the reservoir from the from the master cylinder by pulling the reservoir straight up and away from the cylinder. Remove the seals from the master cylinder. See Figure.