LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Disc Brake Hardware >> Installation

Disc Brake Hardware: Installation

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the caliper pin boots to the disc brake caliper mounting bracket. Install the caliper pins to the disc brake caliper mounting bracket.
  2. Install the disc brake pad retainers to the disc brake caliper bracket. Install the disc brake pads to the disc brake caliper bracket. Install the disc brake caliper to the mounting bracket.
  3. Install the disc brake caliper bolts. Tighten the disc brake caliper bolts to 26 ft lbs. (35 N.m). Apply and release the brake pedal (3/4 stroke) as many times as necessary in order to obtain a firm brake pedal.
Fig 1: Removing & Installing Disc Brake Hardware
G00076356Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals