LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Hose (Front) >> Installation

Brake Hose (Front): Installation

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install NEW copper gaskets to the front brake hose. Install the front brake hose to the caliper. Tighten the retaining bolt to 37 ft lbs. (50 N.m).
  2. Install the retaining clip to the front brake hose. Make sure the brake hose is not twisted. Make sure the brake hose is not in contact with any suspension components.
  3. Connect the front brake pipe to the front brake hose. Tighten the front brake pipe to 15 ft lbs (20 N.m). Bleed the brake hydraulic system. See BLEEDING . Lower the vehicle.
scientia non olet · About LEMON Manuals