LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Disc Brakes & Drum Brakes) >> Overhaul >> Front Brake Caliper >> Reassembly

Front Brake Caliper: Reassembly

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the new piston seal with Delco Supreme 11® (GM P/N 12377967) or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container. Install the lubricated, new piston seal into the caliper bore. Install the caliper piston into the caliper bore.
  2. Install the new piston dust boot seal over the piston. Using a caliper piston dust boot seal installer Caliper Piston Seal Installer (J-29077-A) or equivalent tool, fully seat the dust boot seal for the seal counterbore diameter and the piston bore diameter specified.
  3. Install the bleeder valve and cap to the caliper and tighten the valve securely. Install the front brake caliper to the vehicle.
scientia non olet · About LEMON Manuals