Fluid Leaks
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Before performing procedure, review visual/physical inspection. See VISUAL/PHYSICAL INSPECTION .
- Verify that power steering fluid leaks are present. If leaks are present, go to next step. If no leaks are present, system is okay.
- Inspect the power steering system fittings. If fittings are leaking, go to step 7 . If fitting are not leaking, go to next step.
- Inspect the power steering hoses. If hoses are leaking, go to step 8 . If hoses are not leaking, go to next step.
- Inspect the power steering pump and the reservoir for leaks. If power steering pump or reservoir are leaking, go to step 9 . If power steering pump or reservoir are not leaking, go to next step.
- Inspect the power steering gear for leaks. If power steering gear is leaking, go to step 10 . If power steering gear is not leaking, go to step 11 .
- Tighten the fittings. After completing repair, go to step 11 .
- Replace the power steering hoses. After completing repair, go to step 11 .
- Replace the power steering pump or reservoir. See POWER STEERING PUMP under REMOVAL & INSTALLATION. After completing repair, go to step 11 .
- Replace the power steering gear. See RACK & PINION ASSEMBLY under REMOVAL & INSTALLATION. After completing repair, go to next step.
- Operate the system in order to verify the repair.