Steering Gear Cylinder Pipe Assemblies/"O" Ring Seals: Disassembly
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
Loosen both cylinder line fittings on the cylinder end of the gear assembly. Loosen both fittings on the cylinder line assemblies at the valve end of the gear assembly. Remove both cylinder line assemblies from the rack and pinion gear assembly. Remove the O-ring seals from the valve end of line. Discard the O-ring seals.