Power Steering Reservoir: Disassembly
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Place the hydraulic pump on a fixed, flat surface, with the shaft facing upward. Insert a screwdriver into the retaining clip tab. Using the screwdriver, force the retaining clip tab outward. Slide the reservoir clip away from the hydraulic pump assembly.
- Repeat the above steps to remove the second reservoir clip. Remove the reservoir from the hydraulic pump housing. Remove the O-ring seal from the neck of the reservoir or the hydraulic pump housing. Discard the O-ring seal.