Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector to the windshield wiper switch (2).
- Install the windshield wiper switch (2) to the column (6).
- Install the retaining screw to the windshield wiper switch (2). Tighten the screw to 4 N.m (36 lb in).
- Install the multifunction switch.
- Install the steering column trim covers.
- Connect the negative battery cable.
- Ensure that the windshield wiper switch (2) functions properly.