LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Steering Wheel & Steering Column) >> Removal & Installation >> Steering Column Tilt Head Housing - Disassemble (Off Vehicle) >> Disassembly

Steering Column Tilt Head Housing - Disassemble (Off Vehicle): Disassembly

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the inflatable restraint steering wheel module. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .
  2. Remove the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil - Disassemble (Off Vehicle) .
  3. Remove and dispose of the bearing retainer using J 23653-SIR  and J 42137  .
    Fig 1: Removing Bearing Retainer
    G01582999Courtesy of GENERAL MOTORS CORP.
  4. Remove the shaft lock (1).
  5. Remove the turn signal cancel cam assembly (2).
  6. Remove the upper bearing spring (3).
  7. Remove the upper bearing inner race seat (4)
  8. Remove the inner race (5).
    Fig 2: Locating Shaft Lock, Signal Cancel Cam, Upper Bearing Spring, Upper Bearing Inner Race Seat & Inner Race
    G01583000Courtesy of GENERAL MOTORS CORP.