LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Steering Wheel & Steering Column) >> Removal & Installation >> Multifunction, Turn Signal & Hazard Switch Replacement - On Vehicle >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connectors to the multifunction switch (2).
  2. Install the multifunction switch (2) to the steering column while depressing the spring loaded horn pin.
  3. Install the retaining screws to the multifunction switch (2). Tighten the screws to 4 N.m (36 lb in).
  4. Install the steering column trim covers.
  5. Connect the negative battery cable.
  6. Ensure that the multifunction switch functions properly.
scientia non olet · About LEMON Manuals