LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Steering Wheel & Steering Column) >> Removal & Installation >> Lock Housing Assembly - Assemble (Off Vehicle) >> Assembly

Lock Housing Assembly - Assemble (Off Vehicle): Assembly

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the ignition lock actuator assembly (4).
  2. Install the lock bolt assembly (3).
  3. Install the lock bolt support bracket (2).
  4. Install the 2 tapping screws (1). Tighten the screws to 1.5 N.m (13 lb in).
  5. Install the steering column tilt head housing. Refer to Steering Column Tilt Head Housing - Assemble (Off Vehicle) .
  6. Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle (Without Key)  Or Ignition Lock Cylinder Replacement - On Vehicle (With Key)  .
  7. Enable the inflatable restraint steering wheel module. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .
scientia non olet · About LEMON Manuals