LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Steering Wheel & Steering Column) >> Removal & Installation >> Ignition Lock Cylinder Replacement - On Vehicle (With Key) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector (3) to the ignition lock cylinder (1).
  2. Insert the ignition lock cylinder into the housing assembly (1) while rotating the key approximately 5 degrees counter-clockwise.
  3. Install the steering column trim covers.
  4. Enable the SIR system.
  5. Connect the negative battery cable.
  6. Perform the Passlock Learn Procedure. Refer to PROGRAMMING .
scientia non olet · About LEMON Manuals