Special Tools

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2004 Saturn Ion 3, 2004 Saturn Ion 2, 2004 Saturn Ion 1, 2004 Pontiac Sunfire, and 2004 Pontiac Grand Am. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

Illustration	Tool Number/Description
Courtesy of GENERAL MOTORS CORP.	J 7079-2 Universal Driver Handle - Non-threaded
Courtesy of GENERAL MOTORS CORP.	J 8092 Universal Driver Handle - 3/4 in - 10
Courtesy of GENERAL MOTORS CORP.	J 23907 Slide Hammer with Bearing Adapter
Courtesy of GENERAL MOTORS CORP.	J 24433 Press Tube
Courtesy of GENERAL MOTORS CORP.	J 36513 Gear and Bearing Separator Plate
Courtesy of GENERAL MOTORS CORP.	J 44375 Assembly Pallet
Courtesy of GENERAL MOTORS CORP.	J 44376 Bearing Pusher/Puller
Courtesy of GENERAL MOTORS CORP.	J 44377 Input Shaft Anti-Rotation Tool
Courtesy of GENERAL MOTORS CORP.	J 44378 Press Adapter - all shafts
Courtesy of GENERAL MOTORS CORP.	J 44379 Differential Bearing Puller Plate
Courtesy of GENERAL MOTORS CORP.	J 44380 Differential Bearing Race Puller
Courtesy of GENERAL MOTORS CORP.	J 44381 Shifter Bearing/Input and Output Bearing Remover
Courtesy of GENERAL MOTORS CORP.	J 44382 Countershaft Needle Bearing Puller
Courtesy of GENERAL MOTORS CORP.	J 44383 Countershaft Bearing Installer - to case
Courtesy of GENERAL MOTORS CORP.	J 44385 Differential Bearing Race and Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 44386 Input/Output Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 44387 Output Shaft Bearing Sleeve Installer and Pin
Courtesy of GENERAL MOTORS CORP.	J 44388 Final End Checking Fixture
Courtesy of GENERAL MOTORS CORP.	J 44389 Countershaft Bearing Installer