LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Automatic Transaxle - 4T40-E/4T45-E - Overhaul) >> Repair Instructions >> Side Cover Axle Seal Installation >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire, 2004 Chevrolet Classic, and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Side Cover Axle Seal With J 41102
    GM20827Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: You must use the J 41102  in order to install the seal correctly. The J 41102  installs the axle seal to a given depth.
  1. Install a new side cover axle seal (2) into the side cover. Use the J 41102  .
  2. In order to prevent damage to the shaft splines during vehicle operation, add Polyurea grease (part number 7843867) to the splines on the output shaft.
scientia non olet · About LEMON Manuals