LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Automatic Transaxle - 4T40-E/4T45-E - Overhaul) >> Repair Instructions >> Output Shaft and Final Drive Assembly Removal

Output Shaft and Final Drive Assembly Removal

WARNING: This page is about a different car, the 2004 Pontiac Sunfire, 2004 Chevrolet Classic, and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Output Shaft and Final Drive Assembly
    GM20206Courtesy of GENERAL MOTORS CORP.
  1. Remove, as one unit, the output shaft (94), the final drive assembly (116), and the final drive sun gear (115).
  2. If the differential carrier to case thrust bearing (117) did not remain with the final drive assembly (116), remove the differential carrier to case thrust bearing (117).
scientia non olet · About LEMON Manuals