LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Automatic Transaxle - 4T40-E/4T45-E - Overhaul) >> Repair Instructions >> Forward Clutch Support, Low Roller Clutch Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire, 2004 Chevrolet Classic, and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Forward Clutch Support Snap Ring In Transmission Case
    GM20202Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The snap ring opening must be at the bottom of the transmission case. If the snap ring opening is out of position, inspect the transmission case for damage.
  1. Remove the forward clutch support snap ring (112) from the transmission case. Use the J 28585  .
    2. Fig 2: View Of Forward Clutch Support & Lo Roller Clutch Assembly
    GM20205Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: You may need to depress the parking pawl in order to remove the forward clutch support.
  2. Remove the forward clutch support and the low roller clutch assembly (114). Keep the forward clutch housing to the forward clutch support thrust bearing (113) with the forward clutch support assembly (114).
scientia non olet · About LEMON Manuals