LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Automatic Transaxle - 4T40-E/4T45-E - Overhaul) >> Repair Instructions >> Forward Clutch Assembly Installation

Forward Clutch Assembly Installation

WARNING: This page is about a different car, the 2004 Pontiac Sunfire, 2004 Chevrolet Classic, and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Forward Clutch Assembly
    GM20200Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Rotate the forward clutch assembly (110) counterclockwise during assembly in order to seat the assembly into the lo roller clutch. When assembled correctly, the forward clutch assembly (110) should not turn clockwise.
  1. Install the forward clutch assembly (110) into the transmission case.
    2. Fig 2: Checking Lo/Reverse Band Installation With A Screwdriver
    GM20251Courtesy of GENERAL MOTORS CORP.
  2. Insert a screwdriver through the reverse servo pin hole in order to verify the correct installation of the lo/reverse band. The screwdriver should compress the band around the forward clutch housing.
scientia non olet · About LEMON Manuals