LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Front Suspension System) >> Repair Instructions >> Wheel Stud Replacement >> Tools Required >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle on a hoist.
  2. Remove the tire and wheel assembly.
  3. Remove the hub and bearing assembly. Refer to WHEEL BEARING/HUB REPLACEMENT - FRONT .
  4. Remove the wheel stud (1) from the hub and bearing assembly (2) using the J 43631  .
  5. Fig 1: Removing Wheel Stud
    G01583107Courtesy of GENERAL MOTORS CORP.
  6. Discard the stud.