LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Front Suspension System) >> Repair Instructions >> Wheel Stud Replacement >> Tools Required >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the replacement stud into the hub and bearing assembly (2).
  2. Add enough washers in order to draw the stud into the hub (2).
  3. Install the wheel nut (1) with the flat side against the washers (3).
  4. Tighten the wheel nut (1) until the wheel stud is fully seated against the hub flange.
  5. Back off the wheel nut (1) and remove the washers (3).
  6. Install the hub and bearing assembly.
  7. Install the tire and wheel assembly.
  8. Lower the vehicle.
scientia non olet · About LEMON Manuals