LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Front Suspension System) >> Repair Instructions >> Wheel Bearing/Hub Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the hub and bearing assembly (1) into the steering knuckle (2) and drive axle shaft.
  2. Install the hub bearing mounting bolts (1). Tighten the bolts to 95 N.m (70 ft lbs).
  3. Install the drive axle shaft nut. Tighten the drive axle shaft nut to 200 N.m (148 ft lbs).
  4. Install the brake rotor.
  5. Install the tire and wheel assemblies.
  6. Inspect the front wheel alignment. Refer to SPECIFICATIONS .
scientia non olet · About LEMON Manuals