Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the steering knuckle (4) to the vehicle.
- Install the lower ball joint to the steering knuckle.
- Install the bolts (3) and the nuts (6) attaching the steering knuckle (4) to the strut (2). Tighten the nuts (6) to 180 N.m (133 ft lbs).
- Install the hub and bearing assembly.
- If the vehicle is equipped with ABS, connect the ABS electrical connector.
- Install the tie rod to the steering knuckle.
- Install the tire and wheel assemblies.
- Inspect the front wheel alignment. Refer to SPECIFICATIONS .