Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front suspension support brace (3) to the vehicle.
- Install the bolt (4) to the suspension support brace (3) and lower the tie bar (5). Hand tighten the bolt.
- Install the bolt (4) to the front suspension support brace (3) and the front suspension crossmember (1). Tighten the bolts to 72 N.m (53 ft lbs).
- Lower the vehicle.