Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.

Remove the clutch master cylinder pushrod from the clutch pedal.
Remove the master cylinder retaining nuts at the front of the dash.

Fig 1: View Of Master Cylinder Retaining Nuts
Courtesy of GENERAL MOTORS CORP.
Remove the remote reservoir.

Fig 2: Master Cylinder Remote Reservoir View
Courtesy of GENERAL MOTORS CORP.
Disconnect the clutch actuator cylinder line.

Fig 3: Identifying Clutch Actuator Cylinder
Courtesy of GENERAL MOTORS CORP.
Remove the clutch master cylinder assembly from the clutch pedal assembly.

Fig 4: View Of Clutch Pedal Bracket Mounting Nuts
Courtesy of GENERAL MOTORS CORP.