LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Rear Suspension System) >> Repair Instructions >> Shock, Shock Component, and/or Spring Replacement >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the shock absorber assembly from the vehicle. Refer to Shock Absorber Replacement .
  2. Install the shock absorber assembly (2) in the J 45400  (1).
    Fig 1: Compressing/Releasing Lower Part Of Shock Spring
    GM743246Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The spring is compressed when the strut moves freely.
  3. Turn the spring compressor forcing screw (1) until the coil spring (2) is compressed.
    Fig 2: View Of Compressor Forcing Screw & Coil Spring
    GM743241Courtesy of GENERAL MOTORS CORP.
  4. Remove the shock absorber shaft nut from the shock mount.
  5. Remove the shock absorber from the J 45400  .
  6. Remove the shock bumper and shield from the shock absorber.
  7. Loosen the compressor forcing screw (1) until the upper strut mount and coil spring (2) may be removed.
    Fig 3: View Of Compressor Forcing Screw & Coil Spring
    GM743241Courtesy of GENERAL MOTORS CORP.
  8. Remove the upper strut mount and the coil spring from the J 45400  .