Wheel Drive Shaft Outer Joint and Seal Replacement (Drive Shaft Bar Diameter 24 MM): Notes

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 41398: CV Puller. See Special Tools and Equipment .
J 2619-01: Slide Hammer. See Special Tools and Equipment .
J 35910: Drive Axle Seal Clamp Pliers. See Special Tools and Equipment
J 8039-A: Snap Ring Pliers. See Special Tools and Equipment .