Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the park brake warning lamp switch.
NOTE: Refer to Fastener Notice in Cautions and Notices.
- Install the park brake warning lamp switch mounting screw.
Tighten: Tighten the screw to 3 N.m (27 lb in).
- Connect the electrical connector (1) to the switch.
- Install the console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages and Console.