LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (Automatic Transaxle - 4T40-E/4T45-E - Introduction, Service & Replacement) >> Repair Instructions >> Low/Reverse Servo Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil feed pipes. Refer to Oil Feed Pipes Replacement. 
  2. Remove the 3 low and reverse band servo cover bolts, the servo and the spring.
    Fig 1: View Of Low/Reverse Servo Assembly
    GM588858Courtesy of GENERAL MOTORS CORP.
  3. Disassemble, clean and inspect the low and reverse servo assembly. Refer to LOW AND REVERSE SERVO DISASSEMBLE in Automatic Transaxle 4T40-E/4T45-E-Unit Repair.
scientia non olet · About LEMON Manuals