LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (Automatic Transaxle - 4T40-E/4T45-E - Introduction, Service & Replacement) >> Repair Instructions >> Intermediate/Fourth Servo Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Vehicle Lifting Caution in Cautions and Notices.
  1. Raise the vehicle. Support the vehicle.
  2. Remove the oil pan and filter. Refer to Oil Filter and Seal Replacement .
  3. Remove the oil feed pipes. Refer to Oil Feed Pipes Replacement .
  4. Remove the two intermediate/4th servo cover bolts, the servo and the spring.
    Fig 1: View Of Intermediate/Fourth Servo Assembly & Bolts
    GM589165Courtesy of GENERAL MOTORS CORP.
  5. Disassemble, clean and inspect the intermediate/4th servo assembly. Refer to AUTOMATIC TRANSAXLE - 4T40-E/4T45-E - INTRODUCTION & OVERHAUL .
scientia non olet · About LEMON Manuals