Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate a new O-ring with DEXRON III transmission fluid.
- Install the new O-ring.
- Install the VSS retainer.
- Install the vehicle speed sensor (VSS) assembly.NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the VSS retainer bolt.
Tighten: Tighten the bolt to 9 N.m (80 lb in).
- Connect the VSS connector to the VSS.
- Lower the vehicle.