LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (Manual Transmission - GETRAG 5 Speed) >> Repair Instructions >> Axle Shaft Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the J 44385  and the J 7079-2  in order to install a new seal. Ensure that the seal is seated flush to the outer bore area.
  2. Lubricate the seal with Dexron®-III transmission fluid.
  3. Install the wheel driveshaft. Refer to Wheel Drive Shaft Replacement in Wheel Drive Shafts.
    Fig 1: View Of Wheel Driveshaft
    GM646523Courtesy of GENERAL MOTORS CORP.
  4. Install the front tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals