Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer toFastener Notice
in Cautions and Notices.
- Install the actuator and 2 screws to the upper case.
Tighten: Tighten the screws to 1 N.m (9 lb in).
- Install the upper case assembly.
Tighten: Tighten the screws to 1 N.m (9 lb in).
- Install the cam, the cable and the screw.
Tighten: Tighten the screws to 1 N.m (9 lb in).
- Install the HVAC module assembly. Refer to HVAC Module Assembly Replacement .