Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the engine coolant. Refer to Draining and Filling Cooling System (L61) in Engine Cooling.
- Use the J 38185 in order to reposition the heater hose clamps.
- Disconnect the inlet heater hose (1) from the inlet port of the engine.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Use theJ 38185 to disconnect the inlet heater hose from the heater core.