Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Position the seat belt buckle to the floor pan tunnelNOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the seat belt buckle bolt (3).
Tighten: Tighten the bolt to 48 N.m (35 lb ft).
- Install the seat belt buckle bolt plug.
- Reposition the right front seat to the original position.