LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat belt buckles to the floor pan studs.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the rear seat belt buckle nut.

    Tighten:  Tighten the nut to 50 N.m (37 lb ft).

    Fig 1: Locating Rear Seat Belt Buckle Nut
    GM872223Courtesy of GENERAL MOTORS CORP.
  3. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
scientia non olet · About LEMON Manuals